Anamoparts · Motor components
Piston and ring kit Toyota 5VZ-FE 3.4 L STD 93.50 mm
This Anamoparts kit combines pistons and rings for Toyota 5VZ-FE 3.4 L applications announced by the supplier. The STD size corresponds to a nominal bore of 93.50 mm, to be verified before any engine overhaul.
Quantity
- 8 to 10 day delivery
- Secure payment
- 14-day returns
- 24/7 support
Product details
This Anamoparts piston and ring kit is designed for certain Toyota applications with a 3.4 L 5VZ-FE V6 gasoline engine. It is advertised as standard size for a nominal bore of 93.50 mm, with reference number 13101-62060-01. The image shows six pistons, wrist pins, clips, and several types of rings.
A kit for rebuilding the 5VZ-FE engine
The supplier describes a 3,378 cm³ V6 engine with dual overhead camshafts and 24 valves. The listed applications cover several Toyota models, but the presence of a 3.4 L engine is not sufficient: the 5VZ-FE engine code and the exact reference number must be verified.
The single image allows identification of the pistons and associated components. It does not replace a detailed packing list: confirm the number of wrist pins, clips, and rings required for the job before placing the order.
Advertised dimensions and their meaning Data Value Do not confuse with Nominal bore 93.50 mm, STD Exact diameter of each piston First ring Advertised height 1.50 mm Ring gap Second ring Advertised height 1.50 mm Ring gap Oil control ring Advertised height 4.00 mm Piston operating clearance Supplier reference 13101-62060-01 Automatic validation for each vehicle STD: check the engine block before choosing
The STD size here refers to the supplier's standard offering. An engine block that has already been rebored may require a different size: this listing does not offer oversized variants. Have the cylinders measured and review the machining history before selecting this kit.
The 93.50 mm corresponds to the advertised nominal bore, not a guaranteed measurement of the actual piston diameter. Similarly, the ring heights do not indicate the ring gap. These checks must be performed according to the technical documentation applicable to the engine and the parts received.
Advertised Toyota applications Model Period cited Engine to verify 4Runner 1996–2002 5VZ-FE 3.4 L T100 1995–1998 5VZ-FE 3.4 L Tacoma 1995–2004 5VZ-FE 3.4 L Tundra 2000–2004 5VZ-FE 3.4 L Compare the kit and prepare the job
The supplier states that the pistons are made of aluminum alloy. No compression ratio, piston weight, assembly clearance, or surface treatment figures are documented for this offer; therefore, these elements cannot be deduced from the photo.
Before ordering, cross-reference the VIN, engine code, reference number 13101-62060-01, and engine block measurements. Then confirm the kit contents and any additional parts required. The illustrated kit alone does not constitute a complete rebuild: seals, bearings, and other components must be determined after workshop diagnosis.
Related products
Explore related categories
Customer reviews
Loading reviews…
Frequently asked questions
Which Toyota motor is this kit intended for?
The supplier lists it for the 3.4 L V6 5VZ-FE gasoline engine, on certain 4Runner, T100, Tacoma, and Tundra applications. The VIN and reference must be verified.
Is 93.50 mm the exact diameter of the piston?
No. This value is stated as the standard nominal bore. The actual piston diameter and assembly clearance require measurements and appropriate documentation.
What segment heights are indicated?
The supplier provides 1.50 mm for the first segment, 1.50 mm for the second, and 4.00 mm for the scraper. These values are not the cutting clearances.
How many pistons can be seen in the photo?
The image shows six pistons with pins, clips, and rings. The exact contents of the package must be confirmed before ordering.
Does the kit fit after reaming?
The only option advertised is STD. Compatibility after re-boring depends on the block measurements; no oversize is offered in this product line.
