Does the offer concern only segments?

No. The images and detailed description show pistons with rings. Four pistons are visible in the overview views.

Are the four axes and all the clips confirmed?

The photos show an axle and clips for illustrative purposes only. They do not indicate the total quantity included; the kit's bill of materials must be confirmed before ordering.

What price is stated?

The supplier indicates STD, with an oversize of 0 mm. No repair dimension is offered in the selector of this sheet.

Is the piston diameter 86.01 mm?

86.01 mm is the bore value indicated by the supplier. It describes the cylinder and does not constitute a measurement of the actual piston diameter.

Why is it necessary to check the compression height?

Several versions of pistons exist in this motor family. The height stated here is 48.42 mm; the motor code, original measurements, and correspondence with the connecting rod must be checked.

What stated axle dimensions are announced?

The description states a diameter of 30 mm and a length of 66.85 mm. A catalog from another brand cites 66.75 mm for similar references: the drawing of the kit sold should clarify this discrepancy.

Visuel Anamoparts de quatre pistons avec segments et références BK2Q6105, 9800484380, 9800484580 et 9800484180

Quatre pistons à cuvette centrale avec un axe, des clips et des segments présentés devant

Vue oblique des quatre pistons montrant les calottes à cuvette et les gorges de segments

Gros plan d’un piston à cuvette avec ouverture d’axe, axe séparé, clips et segments

1 / 4

Anamoparts · Motor components

Anamoparts piston and ring kit 2.2 TDCi STD

This Anamoparts kit features pistons with rings for certain 2.2 TDCi diesel applications, in the announced STD size. Compare the engine code, compression height, and dimensions of the motor shaft with the existing assembly.

US$190.90Unavailable

8 to 10 day delivery
Secure payment
14-day returns
24/7 support

Product details

The four images of this Anamoparts offer show pistons with rings, and not just a separate set of rings. The overview views show four pistons; a close-up view details a piston with a pin, clips, and rings. The description states the STD size and references BK2Q6105, 9800484380, 9800484580 and 9800484180.

Pistons with a central cavity and their components illustrated

The pistons have a central cavity visible on the crown and several peripheral grooves. The photos allow comparing the shape of this cavity and the lateral opening of the pin with the installed piston. They also show the rings in place and an example of a set presented separately.

The presence of a single pin and clips in the staging does not indicate the total quantity of these accessories in the package. Confirm the specification for the four illustrated pistons. The selector offers only one variant, with no repair size option.

Dimensions declared in the supplier description
Measurement	Stated value
Cylinder bore	86.01 mm
Size	STD; stated oversize 0 mm
Piston length	74.82 mm
Compression height	48.42 mm
Pin diameter	30 mm
Pin length	66.85 mm
Cavity diameter	49.04 mm
Ring marking	9425 (2.0 / 2.0 / 2.0), supplier label

Choose with compression height and engine code

Compression height is an essential selection criterion. The ET ENGINETEAM catalog dedicated to these references indicates several versions of pistons and connecting rods in the PUMA 2.2 HDi/TDCi family; it recommends identification by engine code or measurement of the original piston.

This catalog gives, for its own kit, a bore of 86 mm and a pin of 66.75 mm, against 86.01 mm and 66.85 mm in this listing. These discrepancies must be reconciled with the exact drawing before ordering; dimensions from another brand do not replace those of the product sold.

Applications and codes cited in this offer
Announced family	References for verification
Ford Ranger / Transit 2.2 TDCi	From 2011 according to supplier; CVF5, CVFF, CVR5 and GBVAJQJ in particular
Citroën / Peugeot 2.2 diesel	4HG, 4HH, 4HJ, 4HU, 4HV — P22DTE family cited
Fiat	Code 4HV cited; vehicle and version to be confirmed
Cross-reference references	BK2Q6105; 9800484380; 9800484580; 9800484180

Prepare a standard size rebuild

Send the workshop the VIN, engine code, reference and measurements of the removed piston. The bore value concerns the cylinder: it must not be presented as the actual measured diameter of the piston. A cylinder that has already been rebored may require a size different from the STD offered.

Before assembly, verify the fit between piston, connecting rod, pin and rings. The ring marking values are not clearance instructions for cutting. Clearances, installation direction and inspection procedures must follow the documentation for the exact application.

Associated products

Explore associated categories

Customer reviews

Loading reviews…

Frequently asked questions

Does the offer concern only segments?
No. The images and detailed description show pistons with rings. Four pistons are visible in the overview views.
Are the four axes and all the clips confirmed?
The photos show an axle and clips for illustrative purposes only. They do not indicate the total quantity included; the kit's bill of materials must be confirmed before ordering.
What price is stated?
The supplier indicates STD, with an oversize of 0 mm. No repair dimension is offered in the selector of this sheet.
Is the piston diameter 86.01 mm?
86.01 mm is the bore value indicated by the supplier. It describes the cylinder and does not constitute a measurement of the actual piston diameter.
Why is it necessary to check the compression height?
Several versions of pistons exist in this motor family. The height stated here is 48.42 mm; the motor code, original measurements, and correspondence with the connecting rod must be checked.
What stated axle dimensions are announced?
The description states a diameter of 30 mm and a length of 66.85 mm. A catalog from another brand cites 66.75 mm for similar references: the drawing of the kit sold should clarify this discrepancy.