Demi-coquilles de coussinets en rangée avec rainure et trou visibles sur la première pièce
Vue de dessus du jeu de coussinets métalliques sous film transparent
Coussinets disposés en rangée montrant les surfaces courbes et les bords de demi-coquilles
Gros plan des inscriptions sur les coussinets, dont le marquage 0.00 U
Vue de côté du jeu de demi-coquilles avec les ergots et les surfaces extérieures visibles
1 / 5

Vowenx · Motor components

Crankshaft bearing kit EP6 and MINI 1.6 L

This crankshaft bearing kit is advertised for EP6 and MINI 1.6 L motors, under references 0113AP and 0113AH. The illustrated half-shells feature smooth or grooved surfaces to be identified before installation.

A$84.14Unavailable

Model: 1 set

  • 8 to 10 day delivery
  • Secure payment
  • 14-day returns
  • 24/7 support

Product details

  • This offer concerns a set of crankshaft bearing shells for the 1.6 L motor applications listed by the supplier. The five images show metallic half-shells, some of which have a groove and a drilling. The choice depends on the motor code, the reference and the required size after checking the crankshaft.

    Bearings for the crankshaft

    References 0113AP and 0113AH are grouped in the catalog of the manufacturer ET ENGINETEAM of a crankshaft bearing set. This identification matches the photographed half-shells. These are internal motor parts, not transmission shaft or driveshaft bearings.

    The selector only offers « 1 SET », i.e. one set. The views show elements under protective film, with sliding faces, grooves, holes and pins visible. These shape differences serve to identify the corresponding positions; the half-shells must not be considered all identical.

    Applications announced by the supplier
    FamilyModels and codes cited
    Peugeot207, 308, 3008 and RCZ
    Citroën and DSC4, DS3, DS4, DS5 and DS6
    MINIR55, R56, R57, R58, R59, R60 and R61
    Motors indicated1.6 L: EP6FDT, EP6CB, N12, N14, N16 and N18
    Mounting validationComplete motor code, VIN and bearing reference to check

    Choose the size with workshop measurements

    The vehicle name is not enough to select a bearing. The list above describes the announced applications and does not cover all their motorizations. Have the exact motor code and the inscriptions on the old parts recorded, then check the condition of the journals and bearing housings.

    A close-up shows the marking « 0.00 U ». This photographed inscription does not constitute a thickness measurement and does not by itself specify the class required for your motor. The selector offers no repair size: have the delivered size confirmed, especially if the crankshaft has already been ground.

    Useful references to compare the set
    PointInformation available
    Supplier references0113AP and 0113AH, also written 0113.AP and 0113.AH
    PresentationCrankshaft bearing half-shells
    Visible detailsSmooth or grooved surfaces, drilling and pins
    Photographed marking0.00 U
    Ordering option1 SET: one set
    Exact size and number deliveredTo be confirmed; no distinct size option

    Prepare the replacement of the bearing set

    Request confirmation of the number of half-shells and their distribution before preparing the refurbishment. The images do not constitute an inventory of connecting rod bearings, thrust washers or screws: these elements are not announced in this offer. The references serve for matching, without attesting to a Peugeot, Citroën or MINI origin.

    The workshop must check the operating clearance and the correspondence of the oil passages with the intended mounting. Keep the identification of the positions when comparing the old parts. If surfaces are marked, searching for the cause and examining the lubrication circuit are part of the preparation, beyond the sole replacement of the bearings.

    Associated products

    Explore associated categories

Customer reviews

Loading reviews…

Frequently asked questions

  • Are these shaft bearings for the drive shaft?

    No. The references 0113AP and 0113AH and the half-shells photographed correspond to crankshaft bearing bushings, placed inside the motor.

  • Which motor codes are announced?

    The supplier lists the 1.6 L EP6FDT, EP6CB, N12, N14, N16 and N18 motors. The full code, VIN and reference required must be checked for each vehicle.

  • Are the bearings compatible with all Peugeot 308 models?

    No. Model 308 appears among the announced applications, but this does not cover all motors. Check the relevant motor and bearing references.

  • What does option 1 SET mean?

    It corresponds to a bearing kit. The exact number of half-shells and their distribution must be confirmed; no other quantity or dimension is offered in the selector.

  • Does the 0.00 U marking guarantee a standard dimension that is suitable?

    No. This marking is visible in a photo, but it does not replace the confirmation of the delivered measurement nor the inspection of the crankshaft and its housings. It does not guarantee assembly after machining.

  • Are the crank arm bearings and thrust washers included?

    They are not advertised as included. This offer features crank bearing half-shells; please confirm the exact inventory of the set.

  • What information should be prepared before placing an order?

    Record the VIN, the complete engine code, the references and markings of the old bearings, as well as the measurements taken by the workshop. Report any previous crankshaft machining.

You may also like