Carte de développement ESP32-S3 Ethernet PoE et caméra

excelente esta placa. uma boa aquisição. vou comprar mais dessas

Moduł sprawdzony, działa poprawnie.

perfeito

The device works very good with MicroPython. Be careful, ethernet port is not a pass through component, so if you bend the ethernet cable, its somewhat easy to break it off the board. Nifty little board, 100% recommended.

excellent

Thanks

Works in ESPHome with this config: esp32: board: esp32-s3-devkitc-1 framework: type: esp-idf flash_size: 16MB psram: mode: octal speed: 80MHz ethernet: type: W5500 mosi_pin: GPIO11 miso_pin: GPIO12 clk_pin: GPIO13 cs_pin: GPIO14 reset_pin: GPIO9 interrupt_pin: GPIO10 manual_ip: static_ip: x.x.x.x gateway: x.x.x.x subnet: x.x.x.x dns1: x.x.x.x dns2: x.x.x.x

Arrived on time, packaged well. Board quality is good, works well with WaveShare examples. Documentation can be found on the WaveShare wiki page.

Arrived quickly. No damage. Tested and it works as expected.

Zamówiłem dwie sztuki, otrzymałem tylko jedną!!!!!

arrived quickly. no damage. tested it and it works.

Thank you!