What does the dimension of 24 mm mean?

It corresponds to the inlet specified for the pump in the supplier's source. It does not describe the outer diameter of the body or the thickness of the rotor.

Is this pump suitable for all 4.6 and 5.4 L Ford V8 engines?

No. The offer targets certain 24-valve SOHC versions. The VIN, pump reference, and suction connection must match the relevant motor.

What markers are indicated?

The visual shows M340 and 224-43663; the text also cites 3L3Z6600AA. These references must be cross-referenced with the required part number without assuming universal equivalence.

Is this a high-flow pump?

No enhanced flow rate version or flow rate value is documented for this Anamoparts offer. The M340 reference alone does not justify an additional performance promise.

Are the strainer and suction tube included?

They are not advertised as included. Both images show the pump only; the accessories and seals required for assembly must be confirmed.

Is the supercharged 2004 F-150 version approved?

No. The supplier line combining overboost and 24 valves requires separate confirmation before ordering and is not included as a guaranteed application.

Visuel Anamoparts de la pompe à huile avec repères M340 et 224-43663 et applications V8 Ford annoncées

Gros plan du corps de pompe métallique, de l’ouverture centrale profilée et des raccordements périphériques

1 / 2

Anamoparts · Motor components

Anamoparts M340 type oil pump for Ford V8 4.6 and 5.4 L

Name: Anamoparts M340 type oil pump for Ford V8 4.6 and 5.4 L
Brand: Anamoparts
SKU: 2026344311
Price: 92.67 EUR
Availability: InStock

This Anamoparts M340-type oil pump is advertised for certain Ford, Lincoln, and Mercury gasoline V8 engines of 4.6 or 5.4 L. Its 24 mm inlet must match the mounting of the identified motor before ordering.

€92.67Available to order

Quantity

8 to 10 day delivery
Secure payment
14-day returns
24/7 support

Product details

This Anamoparts oil pump is offered for certain 4.6 and 5.4 L 24-valve SOHC gasoline V8 versions. The source indicates a 24 mm inlet and the M340, 224-43663 and 3L3Z6600AA references. Both photos show the metal body, its profiled central opening and the peripheral connections.

Check the 24 mm inlet and connections

The 24 mm measurement refers to the inlet stated in the source. It does not correspond to the pump's outer diameter nor to the thickness of its rotor. The 24-valve count, on the other hand, describes the engines mentioned: these two indications relate to different checks.

The close-up view shows a central opening with an internal profile, several mounting ears and a flanged connection drilled with two holes. Compare these elements with the required pump and the suction tube mounted on the engine. The appearance of the body alone is not sufficient to confirm compatibility.

Detailed applications stated by the supplier
Family	Stated period	Indicated version
Ford Explorer / Explorer Sport Trac	2006–2010 / 2007–2010	4.6 L V8 SOHC 24 valves
Ford Mustang	2005–2010	4.6 L V8 SOHC 24 valves
Mercury Mountaineer	2006–2010	4.6 L V8 SOHC 24 valves
Ford Expedition / Lincoln Navigator	2005–2008; Flex 2009–2011	5.4 L V8 SOHC 24 valves
Ford F-150	2004–2008; Flex 2007–2009	5.4 L V8 SOHC 24 valves
Ford F-250 / F-350 Super Duty	2005–2009	5.4 L V8 SOHC 24 valves
Lincoln Mark LT	2006–2008	5.4 L V8 SOHC 24 valves

Identify the exact V8, beyond the vehicle name

Selection should match the full VIN, engine version, pump reference and suction circuit inlet. The list mixes gasoline and Flex and gives different periods depending on the models. It does not establish that the same pump fits all F-150, Mustang or Navigator.

A single line from the supplier describes a 2004 supercharged F-150 with 24 valves. This combination is not validated here and requires separate confirmation. It is not used to extend the table to other supercharged versions. Likewise, the general range 2007–2011 of a field does not replace detailed applications.

Identification and content of the offer
Point	Data available
Brand	Anamoparts
Type and visual reference	M340; 224-43663 inscribed on the visual
Additional text reference	3L3Z6600AA, matching to be confirmed
Stated inlet	24 mm
Declared material	Metal
Accessories	Suction tube, strainer and seals not stated as included

Prepare the refurbishment of the lubrication circuit

M340 is here a matching reference: the offer remains marketed under Anamoparts. It is not presented as an authenticated pump from another brand, nor as a high-flow version. No measured flow, pressure setting or performance improvement is provided for this unit.

Before replacement, have the cause of any insufficient oil pressure diagnosed and check the circuit with the workshop. Check the components and seals required for connection, then apply the priming and mounting procedure specific to the engine. Tightening values and pressure checks must come from this documentation; they cannot be deduced from the photos.

Associated products

Explore associated categories

Customer reviews

Loading reviews…

Frequently asked questions

What does the dimension of 24 mm mean?
It corresponds to the inlet specified for the pump in the supplier's source. It does not describe the outer diameter of the body or the thickness of the rotor.
Is this pump suitable for all 4.6 and 5.4 L Ford V8 engines?
No. The offer targets certain 24-valve SOHC versions. The VIN, pump reference, and suction connection must match the relevant motor.
What markers are indicated?
The visual shows M340 and 224-43663; the text also cites 3L3Z6600AA. These references must be cross-referenced with the required part number without assuming universal equivalence.
Is this a high-flow pump?
No enhanced flow rate version or flow rate value is documented for this Anamoparts offer. The M340 reference alone does not justify an additional performance promise.
Are the strainer and suction tube included?
They are not advertised as included. Both images show the pump only; the accessories and seals required for assembly must be confirmed.
Is the supercharged 2004 F-150 version approved?
No. The supplier line combining overboost and 24 valves requires separate confirmation before ordering and is not included as a guaranteed application.