Does the order cover a pump alone or an assembled module?

The supplier announces a fuel pump module. The photos show the body, the upper plate, the hoses, the wiring, and the assembled float arm.

Is the float present?

Yes, a metal arm and its float are visible in the general photo. However, the electrical values of the sensor and its calibration are not provided.

How many contacts and fittings can be seen?

The top view shows four contacts and two capped elbow fittings. The pinout and fitting diameters remain to be confirmed for the vehicle.

Does this reference fit all Santa Fe 2006–2012 models?

No. The title targets the 2.7 L and the supplier reports differences depending on the markets. It is necessary to cross-reference the VIN, the engine type, and the full reference 31110-2B000; no extension to diesel engines or other displacements has been established.

Are the pressure and flow rate of the pump known?

No pressure or flow rate value is provided for this module. The required specifications must be verified in the vehicle documentation and confirmed for the proposed part.

Are the tank seal and closure ring included?

The announced content is a module. No separate seal or locking ring is mentioned; these components must be verified and provided according to the vehicle's procedure.

Module de pompe à carburant avec corps blanc, platine circulaire, ressort et bras de flotteur latéral

Vue supérieure de la platine avec une prise à quatre contacts et deux raccords coudés capuchonnés en bleu

Gros plan sur les tuyaux annelés, le câblage et le ressort à l’intérieur du module de pompe

1 / 3

Vowenx · Motor components

Fuel pump module Santa Fe 2.7 L, ref. 31110-2B000

This fuel pump module is listed for the Hyundai Santa Fe 2.7 L from 2006 to 2012, with reference number 31110-2B000. The photos show the assembly with its float arm, top connector, and two fittings to compare with the vehicle's installation.

US$113.20Unavailable

8 to 10 day delivery
Secure payment
14-day returns
24/7 support

Product details

This electric fuel pump module is offered for the Hyundai Santa Fe 2.7 L, under the cross-reference number 31110-2B000. The offer covers an assembled module, illustrated with its cylindrical body, its float arm, its hoses, and its wiring. The reference and vehicle configuration must be checked before replacement.

An assembled module with visible float

The general view shows a white body, a circular upper plate, and a metal arm carrying the dark float. The inner close-up reveals corrugated hoses, wires, and a longitudinal spring. These elements allow comparing the module's organization with the one installed in the tank.

The top photo shows a connector with four visible contacts and two bent fittings fitted with blue caps. Their shape and orientation are as important as their number for verifying the connection. No pin assignment or fitting diameter is indicated.

Announced content and observable details
Element	Available information
Packaging	1 fuel pump module
Float	Arm and float visible on the general view
Upper connector	4 visible contacts; pinout not provided
Upper fittings	2 capped bent fittings
Visible internal parts	Corrugated hoses, wiring, and spring
Separate accessories	No separate gasket or sealing ring announced

31110-2B000: match the complete reference

The title targets the Santa Fe 2.7 L and the description announces 2006–2012, specifying that versions may vary by country. The Hyundai/Kia CEDARS catalogue, page 17 associates 31110-2B000 with a gasoline pump module for a 2007 2.7 L Santa Fe. This cross-reference clarifies the part number; it does not validate all configurations for this period.

Keep the full number with its 2B000 suffix. The name Santa Fe is not enough to extend the application to diesels or other displacements. Have the VIN and the reference for the actually installed fuel system checked.

Information to compare before ordering
Point	Verification
Vehicle	VIN, 2.7 L engine, and destination market
Reference	31110-2B000 or documented manufacturer match
Connection	Connector shape, pinout, and fitting orientation
Installation	Module height, plate, and float travel

Measurements and electrical characteristics to confirm

The source provides neither height, nor plate diameter, nor measured pressure or flow. Operating voltage and level sensor values are also not specified. These data must be cross-referenced with the vehicle documentation before installation, without copying them from a visually similar pump.

The illustrated float is not enough to confirm the level indication calibration. The condition of the tank gasket and sealing elements must also be checked; their presence as separate accessories is not announced.

Prepare diagnosis and replacement

Have the electrical supply, connections, and fuel circuit checked before attributing a starting fault to the pump. The module replacement must follow the vehicle procedure, with appropriate leak and operational checks.

After the intervention, the workshop can verify the fuel supply and the consistency of the level indication.

Associated products

Low-pressure electric fuel pump
Other low-pressure fuel pump assembly; does not replace the Santa Fe 31110-2B000 module.

Explore associated categories

Customer reviews

Loading reviews…

Frequently asked questions

Does the order cover a pump alone or an assembled module?
The supplier announces a fuel pump module. The photos show the body, the upper plate, the hoses, the wiring, and the assembled float arm.
Is the float present?
Yes, a metal arm and its float are visible in the general photo. However, the electrical values of the sensor and its calibration are not provided.
How many contacts and fittings can be seen?
The top view shows four contacts and two capped elbow fittings. The pinout and fitting diameters remain to be confirmed for the vehicle.
Does this reference fit all Santa Fe 2006–2012 models?
No. The title targets the 2.7 L and the supplier reports differences depending on the markets. It is necessary to cross-reference the VIN, the engine type, and the full reference 31110-2B000; no extension to diesel engines or other displacements has been established.
Are the pressure and flow rate of the pump known?
No pressure or flow rate value is provided for this module. The required specifications must be verified in the vehicle documentation and confirmed for the proposed part.
Are the tank seal and closure ring included?
The announced content is a module. No separate seal or locking ring is mentioned; these components must be verified and provided according to the vehicle's procedure.