Vowenx · Motor components
Crankshaft bearing kit EP6 and MINI 1.6 L
This crankshaft bearing kit is advertised for EP6 and MINI 1.6 L motors, under references 0113AP and 0113AH. The illustrated half-shells feature smooth or grooved surfaces to be identified before installation.
Model: 1 set
- 8 to 10 day delivery
- Secure payment
- 14-day returns
- 24/7 support
Product details
This offer concerns a set of crankshaft bearing shells for the 1.6 L motor applications listed by the supplier. The five images show metallic half-shells, some of which have a groove and a drilling. The choice depends on the motor code, the reference and the required size after checking the crankshaft.
Bearings for the crankshaft
References 0113AP and 0113AH are grouped in the catalog of the manufacturer ET ENGINETEAM of a crankshaft bearing set. This identification matches the photographed half-shells. These are internal motor parts, not transmission shaft or driveshaft bearings.
The selector only offers « 1 SET », i.e. one set. The views show elements under protective film, with sliding faces, grooves, holes and pins visible. These shape differences serve to identify the corresponding positions; the half-shells must not be considered all identical.
Applications announced by the supplier Family Models and codes cited Peugeot 207, 308, 3008 and RCZ Citroën and DS C4, DS3, DS4, DS5 and DS6 MINI R55, R56, R57, R58, R59, R60 and R61 Motors indicated 1.6 L: EP6FDT, EP6CB, N12, N14, N16 and N18 Mounting validation Complete motor code, VIN and bearing reference to check Choose the size with workshop measurements
The vehicle name is not enough to select a bearing. The list above describes the announced applications and does not cover all their motorizations. Have the exact motor code and the inscriptions on the old parts recorded, then check the condition of the journals and bearing housings.
A close-up shows the marking « 0.00 U ». This photographed inscription does not constitute a thickness measurement and does not by itself specify the class required for your motor. The selector offers no repair size: have the delivered size confirmed, especially if the crankshaft has already been ground.
Useful references to compare the set Point Information available Supplier references 0113AP and 0113AH, also written 0113.AP and 0113.AH Presentation Crankshaft bearing half-shells Visible details Smooth or grooved surfaces, drilling and pins Photographed marking 0.00 U Ordering option 1 SET: one set Exact size and number delivered To be confirmed; no distinct size option Prepare the replacement of the bearing set
Request confirmation of the number of half-shells and their distribution before preparing the refurbishment. The images do not constitute an inventory of connecting rod bearings, thrust washers or screws: these elements are not announced in this offer. The references serve for matching, without attesting to a Peugeot, Citroën or MINI origin.
The workshop must check the operating clearance and the correspondence of the oil passages with the intended mounting. Keep the identification of the positions when comparing the old parts. If surfaces are marked, searching for the cause and examining the lubrication circuit are part of the preparation, beyond the sole replacement of the bearings.
Associated products
Explore associated categories
Customer reviews
Loading reviews…
Frequently asked questions
Are these shaft bearings for the drive shaft?
No. The references 0113AP and 0113AH and the half-shells photographed correspond to crankshaft bearing bushings, placed inside the motor.
Which motor codes are announced?
The supplier lists the 1.6 L EP6FDT, EP6CB, N12, N14, N16 and N18 motors. The full code, VIN and reference required must be checked for each vehicle.
Are the bearings compatible with all Peugeot 308 models?
No. Model 308 appears among the announced applications, but this does not cover all motors. Check the relevant motor and bearing references.
What does option 1 SET mean?
It corresponds to a bearing kit. The exact number of half-shells and their distribution must be confirmed; no other quantity or dimension is offered in the selector.
Does the 0.00 U marking guarantee a standard dimension that is suitable?
No. This marking is visible in a photo, but it does not replace the confirmation of the delivered measurement nor the inspection of the crankshaft and its housings. It does not guarantee assembly after machining.
Are the crank arm bearings and thrust washers included?
They are not advertised as included. This offer features crank bearing half-shells; please confirm the exact inventory of the set.
What information should be prepared before placing an order?
Record the VIN, the complete engine code, the references and markings of the old bearings, as well as the measurements taken by the workshop. Report any previous crankshaft machining.
You may also like
Connecting rod and crankshaft bearings for Audi VW V6 3.0 TFSI
Connecting Rod Anamoparts Maserati V6 3.0 L ref. 326368 308768
Timing kit and water pump Anamoparts Subaru
Bearing kit for crankshaft and thrust washers for EA839 3.0 T
Lots of Audi Q7 A8 S6 S7 lock motors, A/B versions
Right fuel level sensor for BMW X3 F25 and X4 F26