
Anamoparts · Motor components
Anamoparts M340 type oil pump for Ford V8 4.6 and 5.4 L
This Anamoparts M340-type oil pump is advertised for certain Ford, Lincoln, and Mercury gasoline V8 engines of 4.6 or 5.4 L. Its 24 mm inlet must match the mounting of the identified motor before ordering.
- 8 to 10 day delivery
- Secure payment
- 14-day returns
- 24/7 support
Product details
This Anamoparts oil pump is offered for certain 4.6 and 5.4 L 24-valve SOHC gasoline V8 versions. The source indicates a 24 mm inlet and the M340, 224-43663 and 3L3Z6600AA references. Both photos show the metal body, its profiled central opening and the peripheral connections.
Check the 24 mm inlet and connections
The 24 mm measurement refers to the inlet stated in the source. It does not correspond to the pump's outer diameter nor to the thickness of its rotor. The 24-valve count, on the other hand, describes the engines mentioned: these two indications relate to different checks.
The close-up view shows a central opening with an internal profile, several mounting ears and a flanged connection drilled with two holes. Compare these elements with the required pump and the suction tube mounted on the engine. The appearance of the body alone is not sufficient to confirm compatibility.
Detailed applications stated by the supplier Family Stated period Indicated version Ford Explorer / Explorer Sport Trac 2006–2010 / 2007–2010 4.6 L V8 SOHC 24 valves Ford Mustang 2005–2010 4.6 L V8 SOHC 24 valves Mercury Mountaineer 2006–2010 4.6 L V8 SOHC 24 valves Ford Expedition / Lincoln Navigator 2005–2008; Flex 2009–2011 5.4 L V8 SOHC 24 valves Ford F-150 2004–2008; Flex 2007–2009 5.4 L V8 SOHC 24 valves Ford F-250 / F-350 Super Duty 2005–2009 5.4 L V8 SOHC 24 valves Lincoln Mark LT 2006–2008 5.4 L V8 SOHC 24 valves Identify the exact V8, beyond the vehicle name
Selection should match the full VIN, engine version, pump reference and suction circuit inlet. The list mixes gasoline and Flex and gives different periods depending on the models. It does not establish that the same pump fits all F-150, Mustang or Navigator.
A single line from the supplier describes a 2004 supercharged F-150 with 24 valves. This combination is not validated here and requires separate confirmation. It is not used to extend the table to other supercharged versions. Likewise, the general range 2007–2011 of a field does not replace detailed applications.
Identification and content of the offer Point Data available Brand Anamoparts Type and visual reference M340; 224-43663 inscribed on the visual Additional text reference 3L3Z6600AA, matching to be confirmed Stated inlet 24 mm Declared material Metal Accessories Suction tube, strainer and seals not stated as included Prepare the refurbishment of the lubrication circuit
M340 is here a matching reference: the offer remains marketed under Anamoparts. It is not presented as an authenticated pump from another brand, nor as a high-flow version. No measured flow, pressure setting or performance improvement is provided for this unit.
Before replacement, have the cause of any insufficient oil pressure diagnosed and check the circuit with the workshop. Check the components and seals required for connection, then apply the priming and mounting procedure specific to the engine. Tightening values and pressure checks must come from this documentation; they cannot be deduced from the photos.
Associated products
Explore associated categories
Customer reviews
Loading reviews…
Frequently asked questions
What does the dimension of 24 mm mean?
It corresponds to the inlet specified for the pump in the supplier's source. It does not describe the outer diameter of the body or the thickness of the rotor.
Is this pump suitable for all 4.6 and 5.4 L Ford V8 engines?
No. The offer targets certain 24-valve SOHC versions. The VIN, pump reference, and suction connection must match the relevant motor.
What markers are indicated?
The visual shows M340 and 224-43663; the text also cites 3L3Z6600AA. These references must be cross-referenced with the required part number without assuming universal equivalence.
Is this a high-flow pump?
No enhanced flow rate version or flow rate value is documented for this Anamoparts offer. The M340 reference alone does not justify an additional performance promise.
Are the strainer and suction tube included?
They are not advertised as included. Both images show the pump only; the accessories and seals required for assembly must be confirmed.
Is the supercharged 2004 F-150 version approved?
No. The supplier line combining overboost and 24 valves requires separate confirmation before ordering and is not included as a guaranteed application.
You may also like

Connecting rod and crankshaft bearings for Audi VW V6 3.0 TFSI

Connecting Rod Anamoparts Maserati V6 3.0 L ref. 326368 308768

Timing kit and water pump Anamoparts Subaru

Bearing kit for crankshaft and thrust washers for EA839 3.0 T

Lots of Audi Q7 A8 S6 S7 lock motors, A/B versions

Right fuel level sensor for BMW X3 F25 and X4 F26
