What does the illustrated kit contain?

The images show the seals, six pistons, six pins, twelve clips, six sets of rings, and two sets of bushings. The supplied bill of materials must be confirmed for the planned overhaul.

Does this kit fit all GM 3.0 L motors?

No. The supplier targets the LF1 gasoline V6 engine and certain specific applications. The VIN, engine code, and references for each family must match.

Do the pistons measure exactly 89 mm?

The source indicates a cylinder bore of 89 mm. It does not provide an independent measurement of the actual piston diameter of the kit or their installation clearance.

Why is it necessary to check the axle length?

The kit is advertised with 52 mm axles, whereas the official Chevrolet specification sheet for the 12631195 piston ring indicates 52.85 mm. The delivered dimension must therefore be confirmed.

Are the bushings in standard stock?

No standard dimension or repair is identified in the proposed variant. The selection must be matched to the crankshaft dimensions and housings, particularly after machining.

Are the timing components and cylinder head bolts included?

They are neither illustrated nor explicitly announced in the kit content. Have the additional components required for the intervention confirmed.

Are references 12631195 and 12631196 interchangeable?

Their presence in the same listing does not prove this. The Chevrolet catalog identifies 12631195 for a specific side; the piston distribution of the kit must be confirmed.

Visuel Anamoparts du kit V6 3,0 L avec joints, coussinets, six pistons et leurs segments

Ensemble de joints avec deux joints de culasse à trois ouvertures et joints de couvre-culasse bleus

Six pistons alignés avec six axes, douze clips et six groupes de segments

Vue complète des joints moteur, des deux groupes de coussinets et des six ensembles piston et segments

Deux groupes de demi-coquilles de coussinets, avec une pièce à joues et des passages d’huile visibles

1 / 5

Anamoparts · Motor components

Motor refurbishment kit Anamoparts GM LF1 V6 3.0 L, pistons and seals

Name: Motor refurbishment kit Anamoparts GM LF1 V6 3.0 L, pistons and seals
Brand: Anamoparts
SKU: 2026344321
Price: 483.83 AUD
Availability: InStock

This Anamoparts kit includes motor seals, pistons, rings, and bearings for certain GM LF1 V6 3.0 L applications. Selection requires verifying the motor code, references for each family, and dimensions after engine inspection.

A$483.83Available to order

Quantity

8 to 10 day delivery
Secure payment
14-day returns
24/7 support

Product details

This Anamoparts rebuild kit is advertised for the GM LF1 V6 3.0 L gasoline motor. It includes a set of gaskets, pistons with rings, and crankshaft and connecting rod bearings. It is intended for a workshop-prepared motor rebuild, with an advertised bore of 89 mm and dimensions to be matched with the required parts.

An illustrated set for the six cylinders

The photos show six pistons, six pins, twelve clips, and six sets of rings. The sealing section includes two three-port cylinder head gaskets, blue valve cover gaskets, manifold gaskets, and several circular gaskets, including one mounted in a metal holder.

The two sets of half-shells correspond to the advertised bearings. These are plain bearings, not ball bearings. The term "complete" describes the commercial set; it does not guarantee the presence of bolts, timing components, or all parts required for each service.

Dimensions indicated by the supplier
Item	Advertised value
Cylinder bore	89 mm
Piston length	51 mm
Compression height	29 mm
Pin length	52 mm
Pin diameter	24 mm
Top / second / oil ring heights	1.00 / 1.20 / 1.50 mm
Bearing size	Not specified in the offered variant

Distinguish between bore, pin, and repair size

The 89 mm refers to the advertised cylinder bore: this value does not replace the piston measurement or the assembly clearance. The ring heights are not ring gap measurements. A rebuild after machining requires separately selecting the dimensions of the pistons, rings, and bearings.

One point must be confirmed before ordering: the official Chevrolet specification for the GM 12631195 piston indicates a pin of 52.85 mm, while the advertisement for this kit indicates 52 mm. This source describes a specific GM part; it does not certify the dimensions of the Anamoparts kit or its origin. It also identifies 12631195 as a piston intended for a specific side of the motor.

3.0 L V6 applications advertised in the detailed list
Brand and model	Years cited
Buick LaCrosse	2010
Cadillac CTS	2010–2014
Cadillac SRX	2010–2011
Chevrolet Captiva Sport	2012
Chevrolet Equinox	2010–2012
GMC Terrain	2010–2012

Check each parts family with the VIN

These periods are supplier indications, to be confirmed with the VIN and the actual engine code installed. The general field mentioning 2010–2016 and Verano is not included as a compatibility extension: the detailed list does not justify it.

Cross-reference numbers provided
Family	Numbers cited
Gaskets	HSU26269 ; HS54580 ; CS263761 ; CS54661
Bearings	12585761 ; 12610603 ; 12610604
Pistons	12631195 ; 12631196 ; 12566186 ; 12631194 ; 12654417 ; 12654418 ; 12654439

These numbers serve for component cross-referencing; they do not constitute a unique kit reference nor proof that all pistons are interchangeable. Another section lists 112585761, different from 12585761: have the bearing number confirmed instead of merging these two references.

Prepare the order with workshop measurements

Provide the VIN, engine code, removed references, and measurements taken during disassembly. Clarify the distribution of pistons between the two banks, the bearing size, and the delivered nomenclature. Torque values, clearances, and installation positions must come from the procedure for the relevant motor.

Explore associated categories

Customer reviews

Loading reviews…

Frequently asked questions

What does the illustrated kit contain?
The images show the seals, six pistons, six pins, twelve clips, six sets of rings, and two sets of bushings. The supplied bill of materials must be confirmed for the planned overhaul.
Does this kit fit all GM 3.0 L motors?
No. The supplier targets the LF1 gasoline V6 engine and certain specific applications. The VIN, engine code, and references for each family must match.
Do the pistons measure exactly 89 mm?
The source indicates a cylinder bore of 89 mm. It does not provide an independent measurement of the actual piston diameter of the kit or their installation clearance.
Why is it necessary to check the axle length?
The kit is advertised with 52 mm axles, whereas the official Chevrolet specification sheet for the 12631195 piston ring indicates 52.85 mm. The delivered dimension must therefore be confirmed.
Are the bushings in standard stock?
No standard dimension or repair is identified in the proposed variant. The selection must be matched to the crankshaft dimensions and housings, particularly after machining.
Are the timing components and cylinder head bolts included?
They are neither illustrated nor explicitly announced in the kit content. Have the additional components required for the intervention confirmed.
Are references 12631195 and 12631196 interchangeable?
Their presence in the same listing does not prove this. The Chevrolet catalog identifies 12631195 for a specific side; the piston distribution of the kit must be confirmed.